Part 5
OPERATION CHECKLIST
1
CHECKING OPERATION
Each of the functions has been factory checked before shipping. However, it is suggested that you verify the
operation of the oven once more. Refer to the Owner's Manual. Follow the instructions for the basic check.
1. Turn on power supply. The initial signal sound will be heard.
2. Check the operation of the broil mode. When the oven is set to broil, the upper element in the oven should
become red. After a few minutes, partially open the oven door. You should feel heat from the oven. Adjust the
oven mode knob to OFF position.
3. Check the operation of the bake mode. After setting the oven to 350 °F / 177 °C for baking, the temperature of
the oven in the display should increase. Adjust the oven mode knob to OFF position.
4. Check the operation of the convection bake mode. After setting the oven to 350 °F / 177 °C for convection
baking, the fan inside the oven should come on with the door closed. Adjust the oven mode knob to OFF
position.
5. Turn on and off the oven light to check the lights are in normal condition.
6. Check the operation of the burner for each convection mode. After setting the oven to 350 °F / 177 °C for each
convection mode, the fan inside the oven should come on with door closed.
IMPORTANT NOTE
• A small amount of smoke and odor may be noticeable during the initial break-in period.
• If the oven does not operate properly or an F-, followed by a number, appears in the display, see the Owner's
Manual for the troubleshooting list. The list includes common occurrences that are not the result of defective
workmanship or materials in this product. If the problem occurs continuously, contact the dealer.
• Refer to the warranty in the Owner's Manual for the LG toll-free service number and address.
- 13 -