Publicidad
Idiomas disponibles
Idiomas disponibles
ORIGINAL INSTRUCTIONS
GB
Before using the Dremel Versatip, make sure you completely
read and understand this manual.
WARNING
!
Failure to follow all instructions listed below may result in electric
shock, fire and/or serious injury.
WORK AREA
a.
Keep work area clean and well lit. Cluttered and dark
areas invite accidents.
b.
Do not keep or bring combustible materials near the
tool.
c.
Keep children and bystanders away while operating the
tool. Distractions can cause you to lose control.
d.
Only use outside or in well-ventilated rooms.
PERSONAL SAFETY
a.
Stay alert, watch what you are doing and use common
sense when operating the tool. Do not use the tool while
you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating tools
may result in serious personal injury.
b.
Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c.
Do not overreach. Keep proper footing and balance at all
times. This enables better control of the tool in unexpected
situations.
d.
Dress properly. There is a danger of burning yourself
with the flame or with liquid soldering tin. Wear protective
clothing to protect yourself against burns. Keep your hair,
clothing and gloves away from flame. Loose clothes or long
hair can catch fire.
e.
Secure the workpiece. Use a clamping device to hold the
workpiece. This allows you to use both hands to operate
the tool.
f.
Keep this manual for future reference.
g.
Do not use the appliance when it is leaking, shows any
sign of damage or is malfunctioning.
h.
If the appliance is leaking (gas smell) immediately take it
outside and check the tightness without a flame, please
always use soap sud. Filling or refilling the gas cylinder
must be done in a well ventilated place far away from any
possible sources of ignition, open flames, pilot lights,
electrical cookware and away from other persons. Be sure
to observe the safety instructions and warning notices on
the refill cylinder do not make any modifications to the
appliance.
i.
Do not work materials containing asbestos (asbestos is
considered carcinogenic).
j.
Take protective measures when during work dust can
develop that is harmful to one's health, combustible or
explosive (some dusts are considered carcinogenic); wear
a.
READ ALL
INSTRUCTIONS.
b.
c.
d.
e.
f.
g.
The Dremel Versatip is intended for a variety of applications you
will find in the chapter "USE".
The unit, accessories and packaging should be sorted for
environment-friendly recycling.
Description
Model number
Power source
Tank capacity
Run time
Heat-up time
Nominal heat input
(consumption)
Cool-down time
Temperature
Weight
4
a dust mask and work with dust/ chip extraction when
connectable.
TOOL USE AND CARE
Store your tool in an appropriate place with an ambient
temperature between 10°C and 50°C. Allow your tool to
cool off completely before storing. Unused tools should
be stored away from children in a dry location. Switch
off all unused tools.
Always allow the tool to cool
WARNING
!
fully before removing / replacing
tips and / or installing / replacing the nozzle.
Extremely flammable gas under
WARNING
!
pressure.
Do not use near spark or open
WARNING
!
flame.
Do not puncture or incinerate
WARNING
!
container or store at
temperature above 50ºC.
Keep out of reach of children.
WARNING
!
Do not try to disassemble this
WARNING
!
unit.
INTENDED USE
ENVIRONMENT
DISPOSAL
SPECIFICATIONS
Dremel Versatip
2000
Refined butane gas
± 17 ml. / ± 9 grams
± 45 minutes (highest setting)
± 90 minutes (lowest setting)
Instantly (open flame)
± 25 seconds (tips)
12 g/h
Flame guard: 15 min. (< 25°C)
Tips: 17 min. (< 25°C)
1200°C (open flame)
680°C (hot air)
550°C (tips)
135 grams (empty tool)
P
V
c
A
B
C
D
E
F
G
H
I
J
A
B
C
D
E
F
G
H
I
J
K
L
M
R
t
T
g
i
H
w
g
t
T
T
a
1
2
Publicidad
