Publicidad
Idiomas disponibles
Idiomas disponibles
3
DESIGN AND FUNCTION
3.1
AIR FILTERS
CAUTION
•
Do not oil this element. Do not wash in inflammable cleaning
fluids. Do not use solvents other than water. Improper cleaning
may damage the element.
•
Never operate the unit without the element. Never use
elements that are damaged, ruptured or wet. Never use gaskets
that will not seal. Keep spare elements and gaskets on hand to
reduce downtime. Store elements in a protected area free from
damage, dirt and moisture. Handle all parts with care.
NOTICE
Use only genuine Ingersoll Rand air filter elements on Ingersoll
Rand compressor units. Genuine parts are available through your
authorized Ingersoll Rand distributor.
Compressor Air Filter - This device cleans the air stream entering
the compressor inlet and is furnished as standard equipment on the
compressor package. It is a single stage, high efficiency, cellulose
media element housed in a non-corrosive housing.
Efficient compressor package operation depends on the
unrestricted, clean supply of fresh air delivered by the air filter. In
turn, the longevity of the filter element depends on the cleanliness
of the local environment.
EN-10
RELEASED 02/Nov/2023 21:18:09 GMT
3.2
Storing Compressors
Damage to property
Damage to property due to exceeding the permissible
temperature range.
•
The compressor should be stored in a dry area, heated if possible.
This applies especially to the winter months.
Corrosion Protection
All compressors are protected at the factory against corrosion
for shipping and short-term storage prior to commissioning.
If compressors are stored for longer than 6 months, additional
preventive measures must be taken.
Compressors that will be out of service for an extended period of
time must also be protected against corrosion.
STORAGE
NOTICE
Where there is a risk that the permissible temperature limits
of +2°C (36°F) to +65°C (149°F) could be exceed or underrun,
contact Ingersoll Rand.
47794362 Rev.A
Publicidad
