Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Take the product out of the packaging and place it on a suitable
surface: we suggest to use a soft material, such as a sponge or a
cloth.
Open the glass panel, rotating it as shown in Fig. 1.
Remove the grease filters (Fig. 3).
A recess shall be created , where the applian ce will be placed,
which shall have a:
and depth ranging from 210mm to 280 mm.
THE RECESS SHALL BE MADE AFTER IN STAL LING THE APPLIANCE
AND ESPECIALLY AFTER CONNECTING THE AIR OUTLET PIPE.
The recess shall be provided with a socket and a round pipe of
150mm diameter, or a similar section, for the air outlet.
Drill the holes on the ceiling, as shown in Fig. 21, in sert the plastic
plugs into the holes made, and then fix the ceiling brackets as
shown in Fig. 18.
The ceiling brackets are telescopic, so their height can be
adjusted at 70mm between the ceiling and the hood.
If you intend to orient the air outlet of the product, in a different
direction from that established in the factory, you can dismantle
the fan (see fig.19), acting on the four fixing screws, then rotate
and position it as you want, restore the four fixing screws
removed previously.
Bring the hood close to the brackets previously fixed and then
connect the appliance to the supply mains.
Secure the hood to the ceiling, by using the screws supplied, as
shown in Fig. 20.
POR
E L A N T O - N A T O I N I T A L I A
865 x 465 for model 90cm
1165 x 615 for model 120cm
41
Publicidad
