Publicidad
Idiomas disponibles
Idiomas disponibles
Learning the new transmission code:
Once the transmission code is changed in the radio control unit, the
electronic central unit of the cooker hood must be made to set the
new code in the fol- lowing way:
Press the main power-off button (fig. 22) of the hood and then
restore power to the electronic control unit. Within the next 15
seconds, press the Liight Button to synchronise the central unit with
the code.
Reset of the Factory configuration:
To restore the Factory configuration, follow the procedure described
below: press simultaneously buttons:
for 2 seconds. When Leds light on, press buttons:
(within 5 seconds). Leds flashing 6 times indicate the procedure is
completed.
WARNING! This operation deletes permanently the preset codes.
Emergency button:
In the event that the radio control does not work,
use the emergency button to switch the appliance off. After any
necessary repairs have been performed, reset the emergency button.
POR
E L A N T O - N A T O I N I T A L I A
45
Publicidad
