Publicidad
Idiomas disponibles
Idiomas disponibles
to the temperature you require: An audible signal will
sound and the display will indicate that cooking is
complete.
Notes: To cancel the cooking time you have set, keep
pressing
until the
then use
to reset the cooking time to "00:00".
This cooking time includes a preheating phase.
PROGRAMMING THE END COOKING TIME/DELAYED
START
After a cooking time has been set, starting the
function can be delayed by programming its end
time: Press
until the
start flashing on the display.
Use
or
to set the time you want cooking to end
and press
to confirm.
Activate the function by turning the thermostat knob
to the temperature you require: The function will
remain paused until it starts automatically after the
period of time that has been calculated in order for
cooking to finish at the time you have set.
Notes: To cancel the setting, switch the oven off by
turning the selection knob to position " ".
Notes: Delay to start functionality is not available for
Grill and Turbo Grill functions.
END OF COOKING
An audible signal will sound and the display will
indicate that the function has finished.
Turn the selection knob to select a different function
or to position " " to switch the oven off.
Please note: If the timer is active, the display will show "END"
alternately with the remaining time.
4
icon starts flashing on the display,
icon and the current time
.
SETTING THE TIMER
This option does not interrupt or program cooking
but allows you to use the display as a timer, either
during while a function is active or when the oven is
off.
Keep pressing
until the
flashing on the display.
Use
or
to set the time you require and press
to confirm.
An audible signal will sound once the timer has
finished counting down the selected time.
Notes: To cancel the timer, keep pressing
icon starts flashing, then use
"00:00".
. DIAMOND CLEAN FUNCTION
To activate the "Diamond Clean" cleaning function,
pour 200 ml of drinking water into the bottom of the
oven, then turn the selection knob and the thermostat
knob to the
icon.
Please note: The position of the icon does not correspond to
the temperature reached during the cleaning cycle.
The function will activate automatically: the display
shows the time remaining to the end, alternating with
"DC".
Please note: It is only possible to programme the end time of
this function. The duration is automatically set to 35 minutes.
icon and "00:00" start
until the
to reset the time to
Publicidad
