Parkside PPBSA 20-Li A1 Traduccion Del Manual De Instrucciones Originale página 33

5. If you select „Go to add", the available
devices are displayed in a list.
6. Select the smart battery (that you are using
for the device) by setting the check mark
. Select only one device at a time. If
there are other check marks for other de-
vices, clear the check marks by pressing
them.
7. Now press the
colour as the set check mark.
8.­Confirm­the­successful­connection­with­
„Finish".
The device is now listed on the tab
"At home"­and­can­be­selected.

If you have already connected other de-
vices to the app:
"At home",­select­the­
4. On the tab
in the upper right. The app scans the
area for available devices and indicates
if available devices have been found.
If this is not the case, read on if

possible
5. Proceed as with

If a list of available devices is not auto-
matically suggested to you:
If the smart battery (that you are using for the
device) is not suggested automatically, fol-
low these steps:
"At home",­select­the­
4. On the tab
in the upper right.
5. Select "Other"­in­the­bar­on­the­left.
6. Select „Other-2".
7.­Confirm­that­the­display­is­flashing­ra-
pidly.
The app now searches for available devi-
ces and suggests them to you.
8. Select the desired device by pressing
the to add it to the app.
9.­First­confirm­with­„Next", then with „Fi-
nish".
, that has the same
.

­from­point 5.

If you have already connected the
smart battery to the app:
4. Select the tab
5. Select the smart battery (that you are
using for the device). The
indicates that the smart battery is con-
nected to a Performance device.
Features of the app
Select the smart battery
using for the device). This takes you to the
overview page for the device with the
following information and settings:
- The tool device ID helps you identify the
exact tool
- The tool model is indicated along with
the production batch in brackets
- The current power consumption in
amperes
- The current speed is shown in RPM
(revolutions per minute)/min
- The current level is shown and can be
changed, instead of pressing the gear
selection switch (5)
- With the kickback control switch, you
can turn the kickback control on and off
- The device's operating mode can be
selected:­Power,­Professional­and­ECO
- With the lamp switch, you can turn the
work light on and off
- With LED brightness, you can control the
brightness of the work light by moving
the bar from 1% to 100%
- With the LED shutoff delay, you can set
how long the work light stays on after
the On/Off switch is released
-­ You­can­find­the­device's­use time
-­ You­can­find­how­often­the­device­has­
overheated
-­ You­can­find­how­often­the­device­has­
been blocked
GB MT
"At home".
symbol
(that you are
-1
33