5.
Repeat Step 4 for each of the user MMSI's digits. When you have
entered each of the user MMSI's digits, a confirmation screen appears.
6.
If the displayed user MMSI is correct, rotate PUSH/SELECT to select
YES, then press PUSH/SELECT to confirm it. The setup menu appears.
Otherwise, If the displayed user MMSI is not correct, rotate PUSH/SELECT to select NO,
then press PUSH/SELECT to confirm it. Then repeat Steps 3 through 5 to enter the correct
user MMSI.
If you are new to using a marine radio, be sure to read "About Digital Selective Calling" on
Page 5 for a quick background on DSC technology. The first thing you will need to do is
connect an antenna and power to the radio. Then you will need to install the radio aboard your
vessel. See "Connecting the Antenna" on Page 13, "Connecting Power" on Page 13, and
"Installation" on Page 13 if you need any help doing this.
Included With the Radio
Radio (With Microphone Attached)
DC Power Cord
GPS External Cable
10
Mounting Hardware
Spare Fuse
Hailer Cable
USER MMSI
685749638
YES
NO
Microphone Mounting
Bracket
Mounting Bracket
Owner's Manual
Understanding Your Radio
16