Uniden UM525 Manual Del Usuario página 33

Entering a New Directory Entry
1. Rotate PUSH/SELECT to select NEW, then press PUSH/SELECT to select it. A screen
appears where you can enter the vessel's information. The cursor moves to the first digit
of the vessel's MMSI.
2. Rotate PUSH/SELECT clockwise to increase the displayed digit or counterclockwise to
decrease it. When the MMSI digit you want appears, press PUSH/SELECT to select it.
The cursor moves to the next digit.
3. Repeat Step 2 for each of the MMSI's digits. When you have entered all of the MMSI's
digits, the cursor moves to the first character of the vessel's name.
4. You can enter a vessel name up to 12 characters in length. Rotate PUSH/SELECT
clockwise to move forward through the displayed characters or counterclockwise to move
backward. When the character you want appears, press PUSH/SELECT to select it.
The cursor moves to the next character.
5. Repeat Step 4 for each of the vessel name's characters. When you have entered all of
the vessel name's characters, a confirmation screen appears.
6. If the MMSI and vessel name you set appears correctly, rotate PUSH/SELECT to select
YES. The radio saves the MMSI and vessel name you input. Otherwise, rotate PUSH/
SELECT to select NO.
Deleting a Directory Entry
1. Rotate PUSH/SELECT to select DELETE, then press PUSH/SELECT to select it.
A screen appears where you can delete the vessel's information.
2. If you want to delete the displayed directory entry, rotate PUSH/SELECT to select YES,
then press PUSH/SELECT to confirm it. The directory entry is deleted.
Otherwise, If the displayed directory entry is not the one you want to delete, rotate PUSH/
SELECT to select NO, then press PUSH/SELECT to confirm it. The directory entry is not
deleted.
Using Channel Tag
This option lets you assign a name to marine channels. This makes it easy to quickly select
and work with these channels. You cannot edit weather channel tags.
Note: You cannot use a WHAM wireless microphone to use channel tags on the radio.
Rotate PUSH/SELECT to select CH TAG, then press PUSH/SELECT to select it. A screen
appears showing the current channel tags.
To edit a channel tag, see "Editing a Channel Tag". To set a channel tag to its default name,
see "Setting a Channel Tag to its Default Name" on Page 34.
Editing a Channel Tag
1. Rotate PUSH/SELECT to select the channel tag you want to edit, then press PUSH/
SELECT to select it. A screen appears where you can select what action you want to
take.
Using the Radio's Menus
33