A Look At The Display - Uniden UM525 Manual Del Usuario

A Look at the Display

Status Icons
Status Message
Appears here (see
"Status Messages"
on Page 18)
Channel Name
Scrolls here (as shown under 'Full
Name' in "USA/Canadian/
International Channel Frequencies"
on Page 44)
TX - Appears while the radio is transmitting. (
example shown above).
- Appears while the radio is set to its Triple Watch mode. (
TRI
as in the example shown above).
TRI
- Appears while the transmit power is set to 1 watt. (
LO
in the example shown above).
HI - Appears while the transmit power is set to 25 watts. (
HI in the example shown above).
- Appears while the radio is set to its USA channel mode. (
USA
same place as in the example shown above).
USA
- Appears while the radio is set to its international channel mode. (
INT
in the same place as
INT
- Appears while the radio is set to its Canada channel mode. (
CAN
the same place as
CAN
MEM - Appears when the currently-tuned channel is in the radio's memory.
- Appears while the radio is set to its WX mode. (
WX
in the example shown above).
WX
- Appears while the radio is set to its WX Alert mode.
ALT
- Appears when an installed scrambler board is working and the scrambler is turned
SCRM
on. ( appears in the same place as
WX
Setting Up The Radio
TRI LO USA
MEM WX ALT
GPS OK
DISTRESS
TRI
in the example shown above).
in the example shown above).
in the example shown above).
SCRM
16
appears in the same place as
appears in the same place
TX
HI appears in the same place as
appears in the same place as
LO
and
INT CAN
USA
and
USA
appears in the same place as
SCRM
A
TX in the
LO
appear in the
and appear
CAN
appear in
INT
17