PlenOptika QuickSee Free Manual De Instrucciones página 10

2. Reconnecting the Companion App to a previously connected QuickSee Free medical device:
a. Turn the Bluetooth on from the drop-down menu of the QuickSee Free medical device or put the
QuickSee Free medical device in discoverable mode (Bluetooth). Discoverable mode is indicated by the
Bluetooth searching
on again, from the drop-down menu.
b. From the Companion App, turn on the Bluetooth of the PC, smartphone, or tablet (if it is off) and
connect directly to an already known QuickSee Free medical device identified by its serial number or by a
custom alias previously set by the user.
When the QuickSee Free medical device is connected to the Companion App, the QuickSee Free medical
device will show a link symbol
Connecting to the Bluetooth printer
Each QuickSee Free medical device is shipped with a
pre-paired Bluetooth printer.
To print measurement results, turn on the paired
Bluetooth printer with a long press on its power but-
ton. When results are available, you can print them
from the Results Screen by pressing "+", and then
pressing the printer symbol.
You can select the Bluetooth printer by accessing
the settings, through the pull-up menu, and then
pressing "Printer". The screen will subsequently
show that nearby devices are being scanned, where
you will have to select the "Bluetooth Printer" identi-
fied by its MAC address.
If you do not have a Bluetooth printer selected or the
selected printer is not available, a warning message
will appear.
10
symbol. If the device is not in discoverable mode, turn the Bluetooth off, and then
and the Companion App will display the data from the device.