Descargar Imprimir esta página

PlenOptika QuickSee Free Manual De Instrucciones página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

a. focus on the distant target instead of the red dot, and
b. blink at the start of the measurement and a few times during the measurement.
7. After the acquisition starts, a dotted line will
appear around the pupil's image indicating the
acquisition progress.
8. After 10 seconds (default value), the patient's
estimated prescription for the selected eye will
be displayed on the Results Screen.
Results screen
After measurements are taken, the Results Screen
will show the estimated prescriptions. (NOTE:
keratometry results will be shown only on QuickSee
Free Pro Keratometry).
1. Swipe horizontally to navigate between eyes and
vertically to navigate between measurements for
the selected eye (if more than one measurement
was performed).
2. To re-measure an eye: navigate to the specific
eye, press the '+' button, and select OD or OS to
start a new measurement of the same patient.
3. To save the measurements and start a new
patient: press the '+' button slide the slider button
from left to right to start with new patient record.
7

Publicidad

loading

Este manual también es adecuado para:

Quicksee free pro keratometry