fire. NEVER try to extinguish a
•
fire with water, but switch the
appliance off and then cover
the flame e.g. with a lid or a fire
blanket.
•
WARNING: The cooktop is hot
during use and it remains so for
some time after being switched
off. The risk of burns remains
until the residual heat indicators
have gone out.
•
WARNING: Use only hob guards
designed by the manufacturer
of the cooking appliance or
indicated by the manufacturer of
the appliance in the instructions
for use as suitable or hob guards
incorporated in the appliance.
The use of inappropriate guards
can cause accidents.
•
CAUTION: The cooking process
has to be supervised. A short
term cooking process has to be
supervised continuously.
•
DANGER OF FIRE: Do not
store items on the cooking
surfaces! Metallic objects such
as knives, forks, spoons and
lids should not be placed on
the hob surface since they can
become hot.
Always switch the cooking zones
off after use!
The appliance is not intended to be
operated by means of an external
timer or separate remote-control
system. This is not applicable in
case of switching-off the operation
by means of the devices covered
by EN 50615.
The manufacturer's trademark and
model type can be found in the
lower part of the device, visible
after opening the doors or drawers.
INSTALLATION INSTRUCTIONS
If the built-in oven or any other appliances
that produce heat, need to be installed
directly underneath the cooking hobs in
ceramic glass, IT IS NECESSARY THAT
THE APPLIANCE (oven) AND THE
COOKING HOBS IN CERAMIC GLASS
ARE ADEQUATELY ISOLATED, in such
a way that the heat generated from the
oven, measured on the right hand side of
the bottom of the cooking hobs, does not
exceed 60°C.
Failure to follow this precaution, could
cause a malfunction in the TOUCH
CONTROL system.
POSITIONING
The domestic appliance was built in order
to be encased on a work surface, the way it
is illustrated in the graph (Fig.1A- Fig.1B).
Predispose sealing material (Fig.4) along
the whole perimeter (for dimensions of the
cut see Fig.1). Lock the domestic appliance
into place with 4 supporters, keeping in
mind the width of the surface (Fig.2).
If the lower part of the appliance after
installation, is accessible via the lower part
of the furniture, it is necessary to mount
a separating panel keeping in mind the
distances indicated (Fig.3). This is not
necessary if underneath the induction hob
is installed an oven.
VENTILATION
The distance between the cooktop and
built-in kitchen's furniture or cooking
apparatuses must guarantee sufficient
ventilation of the air. Not to use the cooktop
if in the oven is in course the pyrolysis
process.
13