HOMCOM 824-081V90 Manual Del Usuario página 6

USING THE ICE BLOCKS (OPTIONAL)
There are two ice blocks included that can be used for extra cooling effect, if
desired.
IMPORTANT!
●Use only clean water for filling the ice blocks. Do not fill water above the maximum
marking.
●The ice blocks are not food safe, do not use for storing food or beverages.
●Keep away from children.
●Empty the water and dry out the ice blocks before storage.
1. Open the cap, add clean water up to the maximum level marking, close and place
in your freezer fora few hours.
2. Once frozen, the ice blocks can be added to the water tank.
Note: Make sure that the water level in the tank does not go above the 'MAX' level
indicated.
OPERATION
WARNING!
●Make sure that the caster wheels are attached before switching the unit on.
●Once the water is filled, take extra care to ensure that you don't tilt the unit.
●Push the unit gently if you wish to move it to a new position.
●Do not remove the water tank while the unit is plugged in.
1. Keep the unit on a flat, stable ground without any obstacles near it.
2. Connect the power plug to a suitable electrical outlet with the same
specifications as mentioned in the unit's rating label (see technical specifications
for details). When the supply is turned on at the outlet, the unit receives power and
is in standby mode. The power indicator light turns 0n.
3. You may now use the control panel buttons or the remote control to operate the
cooler.
CONTROL PANEL
Cool Mode Timer Swing Speed Power
5