Fuji FRC-200-1 Manual Del Operario página 10

Operator's Manual
Technical Data
Maximum working pressure
6.3 bar / 90 psig / 0.63MPa
Free speed (rpm)
Power (W)
Weight (kg)
Weight (lb)
Load air consumption (m³/min)
Sound pressure level (dB(A))
Vibration (m/s²)
Vibration Uncertainty
Noise and vibration
Uncertainty 3 dB(A), in accordance with EN ISO 15744.
For Sound power level, add 11 dB(A)
Vibration standard : ISO 20643
These declared values were obtained by laboratory type
testing in accordance with the stated standards and are
suitable for comparison with the declared values of other
tools tested in accordance with the same standards. These
declared values are not adequate for use in risk assess-
ments and values measured in individual work places may
be higher. The actual exposure values and risk of harm
experienced by an individual user are unique and depend
upon the way the user works, the workpiece and the work-
station design, as well upon the exposure time and the
physical condition of the user.
We, Fuji Industrial Technique Co., Ltd, cannot be held
liable for the consequences of using the declared values,
instead of values reflecting the actual exposure, in an indi-
vidual risk assessment in a work place situation over which
we have no control.
This tool may cause hand-arm vibration syndrome if its use
is not adequately managed. An EU guide to managing
handarm vibration can be found by accessing
pneurop.eu/ index.php and selecting 'Tools' then 'Legisla-
tion'.
We recommend a programme of health surveillance to de-
tect early symptoms which may relate to noise or vibration
exposure, so that management procedures can be modi-
fied to help prevent future impairment.
• If this equipment is intended for fixtured applications:
The noise emission is given as a guide to the ma-
chinebuilder. Noise and vibration emission data for
the complete machine should be given in the instruc-
tion manual for the machine.
10
Safety
SAFETY is a primary consideration when using FRC-200-
FRC-200-1
1. The machine should be used in the right way with good
7000
understanding of how to use the tool safely.
1250
4.7
10.4
1.4
Read and fully understand all the instructions before use of
the tool. If not, it might be dangerous to use the tool. Keep
FRC-200-1
this instruction manual for future reference.
87
< 2.5
----
Spindle and Cutter are rotating at high speed. Moving parts
can crush and cut. Keep hands away from moving parts
Additional safety information is available from the man-
ufacturer or manufacturer's agent in your country when
necessary.
Do not remove or allow to become obscured any labels
and/or markings shown on the tool.
Labels must be replaced immediately when damaged or
unreadable.
•
Protective equipment
Always wear necessary protective equipment such as
an eye protector, an ear protector, a face shield, a safety
apron, a helmet, gloves and other necessary protective
http://www.
clothing. Use protective barriers where necessary.
WARNING Risk of Property Damage or Severe Injury
Ensure that you read, understand and follow all instruc-
tions before operating the tool. Failure to follow all the
instructions may result in electric shock, fire, property
damage and/or severe body injury.
•
•
© Fuji Industrial Technique Co., Ltd. - 9502001250
To reduce risk of injury, everyone using, installing,
repairing, maintaining, changing accessories on, or
working near this tool must read and understand the
safety instructions before performing any such task.
Read all Safety Information delivered together with the
different parts of the system.
Read all Product Instructions for installation, operation
FRC-200-1