Mx Onda MX-PIP2200 Manual De Instrucciones página 17

• This appliance is intended for home use only, not professional
use. MX ONDA will not accept any responsibility and the
guarantee will be void in case of improper use or failure to follow
instructions.
• Do not use this appliance near flammable materials (curtains,
curtains, etc.)
• To reduce the risk of fire, electric shock, or personal injury, DO
NOT block or insert objects into the ventilation slots.
• This plate is designed for indoor use, do not use it outdoors.
Avoid exposure to rain, humidity or other atmospheric
phenomena.
• This device works at high temperatures, so DO NOT touch the
glass surface during handling. Before cleaning or moving the
plate, wait for it to cool. If necessary, use gloves or kitchen mitts.
• Keep the appliance out of the reach of children, the surface of the
plate as well as the containers can reach high temperatures.
• Unplug the hob when you are not going to use it for a long period
of time, when there is a power outage, or a fuse or circuit breaker
"trips", or during the cleaning process.
• Make sure that the power outlet where the device is connected is
easily accessible. To disconnect the board from the mains, gently
pull the plug from the socket. Never do it by pulling on the cable.
• Do not place the hob on top of stoves, other hobs or microwave
ovens.
• Never move the plate during use, unplug the plate and allow it to
cool before moving it.
• While the appliance is connected and the plate is still hot, do not
neglect your supervision and keep it out of the reach of children.
• The use of accessories not recommended by the appliance
manufacturer may cause fire, electric shock, or personal injury.
• Only use induction-safe containers with a bottom of 12 to 26 cm
and completely flat. Containers with slightly curved or domed
bottoms should not be used.
17