OHAUS Frontier FC5513R Manual De Instrucciones página 21

EN-16
3.7 Imbalance detection
In case of the rotor not being equally loaded, the drive will turn off during acceleration. The rotor decelerates to
stand still.
When in the display "Time/Prog" (A-3) the word "error" (M11) together with the number "01" appear, the weight
difference of the samples is too large. Distribute the weight evenly.
Load the rotor as described in chapter 3.1.2 and 3.1.3.
When inside the display "Time/Prog" (A-3) the word "error" together with the number "02" (see figure 25) appear,
it could be due to the following reason: The imbalance sensor is defective.
Figure. 24
M11
Figure. 25
TM
Frontier Centrifuge FC5513&FC5513R
9
A-4