Philips POCKET MEMO PSE8000 Manual Del Usuario página 19

Assign keywords (author ID and work
type)
One or more keywords, such as the author' s name or a work
type, can be assigned to every recording. Keywords can be
used to identify recordings and automatic file routing in Philips
SpeechExec software.
Note
• Keywords must first be set up with Philips Speech Exec
software.  Advanced configuration, p. 22.
• By default, the keyword category Author with the
keywords 'DPM8000/DPM8500' and '- - -' (empty) and the
category Work type with the keywords 'Memo', 'Letter',
'Fax' and 'Report' are available.
Assign an author name
1
While the recorder is in stop mode, press F2 (Menu) and
select File > Author.
X a list of author names is displayed.
2
Press + / – to select an author name.
3
Press F2 (OK) to assign the selected author name to the
recording.
Assign a work type
1
While the recorder is in stop mode, press F1 (Work type)
X a list of work types is displayed.
2
Press + / – to select a work type.
3
Press F2 (OK) to assign the selected work type to the
recording.
Instructions
Spoken instructions are recorded comments by the author that
are directed to the person transcribing the recording. They
usually contain information which is relevant to the recording but
does not have to be typed out.
1
To record an instruction, press and hold F3 (Instr) during
recording.
X The instruction is displayed as a blue line on the file posi-
tion bar.
2
To locate an instructions, press + / – while the recorder is in
stop mode ( Selecting a file, p. 16).
3
To delete an instruction, follow the steps for deleting a part
of a recording ( Delete part of a file, p. 17).
Note
• Instructions can only be recorded when the recording
format is DSS/DSS Pro.
19
EN