Descargar Imprimir esta página

HT Instruments HT4020 Manual De Instrucciones página 36

Ocultar thumbs Ver también para HT4020:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

2. GENERAL DESCRIPTION
Those instruments HT4020 and HT4022 can perform the herewith measurements:
• AC TRMS voltage
• DC voltage
• AC TRMS current
• Harmonic AC voltage (from DC to 25
• Harmonic AC current (from 1
• Voltage frequency with input test leads
• Current frequency with clamp jaws
• Resistance and continuity test
• Phase rotation and coincidence test with 1 test lead
• Active, reactive, apparent power on single-phase and balanced three phase systems
• Power factor measure on single-phase and balanced three phase systems
• Active, reactive, apparent energy on single-phase and balanced three phase systems
Each parameter can be selected using the 7-position rotary switch, including an OFF
position. There are also the following buttons: "
and "D-H /
" (HT4020) or "
"D-H /
" (HT4022). For their use please see § 4.2. The selected quantity appears on a
high-contrast display with unit and function indication.
3. PREPARATION FOR USE
3.1.
PRELIMINARY CHECKS
This instrument has been checked mechanically and electrically before shipment. All
precautions have been taken to assure that the instrument reaches you in perfect
condition.
However, it is advisable to carry out a rapid check in order to detect any possible damage,
which might have occurred in transit.
Check the accessories contained in the packaging to make sure they are the same as
reported in § 6.3.1.
3.2.
POWER SUPPLY
The instrument is supplied with 2x1.5V AAA batteries. The instruments battery life is about
90 hours. The "
them following the instructions in § 5.2.
3.3.
STORAGE
In order to guarantee the accuracy of the measurements, after a period of storage in
extreme environmental conditions wait for the tester to stabilize to within the specified
operating conditions (see § 6.2.1) before use.
st
th
to 25
FUNC / HARM", "MAX/MIN/PK / H", "ENERGY / H" and
" symbol appears when the batteries are nearly discharged. Replace
th
components) and THD% (HT4022)
components) and THD% (HT4022)
FUNC ", "MAX/MIN/PK", "ENERGY"
EN - 4
HT4020 - HT4022

Publicidad

loading

Este manual también es adecuado para:

Ht4022