Renson ALGARVE Manual De Usuario página 129

Copy Situo one-way
hand-held transmitter
programming to another
Situo hand-held transmitter.
A. Select the channel you wish to copy
on Situo 1 (bladed roof, fixscreen,
LED, etc.).
B. Press longer than 3 sec. on the PROG
button at the back of the Situo 1 re-
mote until the blades move back and
forth, the fixscreen shortly moves up
and down or the LED flashes.
C. Select the desired channel on Situo 5
to which you want to copy.
D. Press briefly on the PROG button on
the rear of the Situo 5 remote.
Controlling the heating
element
The heater is by default without a receiver,
transmitter and controller. By installing
an optional Heating Receiver, you can
control the heater with a remote control.
A. Press the UP button on the Situo re-
mote to switch on the HEAT.
B. Press the DOWN button on the Situo
remote to switch off the HEAT.
C. By continuing to press the UP button,
you can increase the intensity of the
heating element (0 - 33 - 66 - 100%).
By continuing to press the DOWN
button, you can decrease the intensity
of the heating element (100 - 66 - 33
- 0%).
Note: with an io receiver the heat can
only be switched on/off. It is not possible
to adjust the intensity.
0,5 sec.
ON
SITUO 1 SITUO 1
A
SITUO 1
SITUO 1
C
SITUO 5 SITUO 5
SITUO 5
SITUO 5
0,5 sec.
ON
ON > OFF
Only with RTS !
0,5 sec.
OFF
> 3 sec. > 3 sec.
prog prog
S mfy S mfy
Situo 1 io Pure II Situo 1 io Pure II
> 3 sec.
> 3 sec.
SITUO 1 SITUO 1
B
prog
prog
S mfy
S mfy
Situo 1 io Pure II
Situo 1 io Pure II
SITUO 1
SITUO 1
0,5 sec. 0,5 sec.
D
prog prog
S mfy S mfy
Situo 5 io Pure II Situo 5 io Pure II
0,5 sec.
0,5 sec.
SITUO 5 SITUO 5
prog
prog
S mfy
S mfy
Situo 5 io Pure II
Situo 5 io Pure II
SITUO 5
SITUO 5
0,5 sec.
ON
100%
A
ON > OFF
ON
0,5 sec.
OFF
0%
0,5 sec.
ON > OFF
B
OFF
prog
S mfy
Situo 5 io Pure II
0% - 33% - 66% - 100%
C
100% - 66% - 33% - 0%
LED
LED
ON > OFF
0,5 sec.
OFF
0,5 sec.
ON > OFF
prog
S mfy
Situo 5 io Pure II
0% - 33% - 66% - 100%
EN
100% - 66% - 33% - 0%
129