EINHELL GP-CT 36/35 Li BL Manual De Instrucciones Original página 20

•
Guard hood
•
Steady grip
•
Hexagon key
•
Harness
•
Edge guide
•
Support bar
•
Socket head screw M6 x 60mm
•
Assembly screw (4 pcs)
•
Original operating instructions
•
Safety information
3. Intended use
The equipment is designed for cutting lawns and
grassed areas. It is not designed to be used for
public facilities, parks, sports centers, along road-
ways, or in agriculture and forestry.
The operating instructions as supplied by the ma-
nufacturer must be kept and referred to in order to
ensure that the equipment is properly used and
maintained.
Important. This equipment must not be used
for composting purposes (shredding) as this
could result in injury or damage to property.
The equipment may be used only for the tasks it
is designed to handle. Any other use is deemed
to be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
•
Lung damage if no suitable protective dust
mask is used.
•
Damage to hearing if no suitable ear protec-
tion is used.
•
Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
•
Injuries and material damage caused by fly-
ing parts.
•
Cut injuries if suitable protective clothing is
not worn.
Anl_GP_CT_36_35_Li_BL_SPK13.indb 20 Anl_GP_CT_36_35_Li_BL_SPK13.indb 20
GB
4. Technical data
Voltage ....................................................36 V d.c.
Speed n ..............................................7000 min
0
Cutting circle .......................................... Ø 35 cm
Protection class ................................................III
Weight: .....................................................3.05 kg
Caution!
The equipment is supplied without batteries and
without a charger and is allowed to be used only
with the lithium-ion batteries (two batteries) of the
Power X-Change series!
The lithium-ion batteries of the Power X-Change
series are allowed to be charged only with the
Power-X charger.
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 62841.
Sound pressure level L
Uncertainty K : ............................................ 3 dB
pA
Sound power level L : ........................ 93.5 dB(A)
WA
Uncertainty K : .......................................... 3 dB
WA
Guaranteed sound power level L
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 62841.
Handle
Vibration emission value a
K uncertainty = 1.5 m/s
Additional handle
Vibration emission value a
K uncertainty = 1.5 m/s
The stated vibration emission levels and stated
noise emission values were measured in ac-
cordance with a set of standardized criteria and
can be used to compare one power tool with
another.
The stated vibration emission levels and stated
noise emission values can also be used to make
an initial assessment of exposure.
- 20 -
-1
: ................... 84.7 dB(A)
pA
: ....... 96 dB(A)
WA
2
= 1.904 m/s
h
2
2
= 3.904 m/s
h
2
02.05.2023 09:49:52 02.05.2023 09:49:52