Publicidad
Idiomas disponibles
Idiomas disponibles
English
Symptom
Sawblade is dull
Cannot cut with precision
Switch can't be pulled
Possible cause
The sawblade has been installed in
reverse.
The operation parts of the tool are not
fully fixed.
Material cannot be fixed in the correct
position.
Switch lock is not pressed in enough.
24
Remedy
Install the sawblade in the correct
direction.
Fully install the bevel lock handle and
miter lock handle.
Remove any foreign material from the
fence or turntable.
In some cases, proper position
cannot be fixed due to a curve in the
material. Try to fix a flat surface with
the fence or turntable.
Press in the switch lock all the way
until it strikes the back
Publicidad
