Publicidad
Idiomas disponibles
Idiomas disponibles
ADJUSTING
THE DOORS
After putting the doors back on the refrigerator,
make sure the refrigerator
is level so that you can make final
adjustments.
If the Refrigerator
is not level, it will not be possible to get the doors perfectly even, which may cause moisture
condensation
and increased
energy bills.
For example, when the left side is lower than the right side, insert a flat-blade
screwdriver(-)
into a notch on th
left control lever, and turn it counterclockwise
to level the door.
Turn it clockwise
to lower the refrigerator and counterclockwise
to raise it.
CAUTION
Both control levers must be touching
the floor to avoid possible personal
injury or property damag
because of tipping.
We do not recommend
making small adjustments
with the control lever. Instead, refer to the next
page for the best way to make minor adjustments
to the doors.
@... ...9
flat-blade
screwdriver(-}
Control
Lever
Control
flat=blade
screwdriver(-}
Settisg up
Publicidad
