Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLING THE WATER LINE
Connecting
the water
supply
line to the refrigerator.
There are several items that you need to purchase to complete this connection.
You may find these items sold as a kit at your local hardware store.
............
Use C0##er
Tubing .......................................
Use P!ast!c
Tubing .....................
IA" copper tubing
" W' plastic tubing
W' compression nut (2pc)
_ Molded end(Bulb)
• Ferrule (2pc)
" W' compression nut (2pc)
tic tubing (A)
(Supplied)
Refrigerator
_"
Compression nut (A
(1/4") (Supped)
t
__sobr_i2_io
n fitting
Ferrule
Molded end(Bulb)
(Not supplied)
i
i
ompression nut (B
,
/4") (Not supplied)
Copper tubing
Plastic tubing (B)
(Not supplied) or (Not supplied)
Household
water
supply
line
1. Slip the compression
nut (A) through
the supplied
plastic tubing (A).
2. Tighten the compression
nut (A) onto the 1/4" compression
fitting.
- If you are using copper
tubing, slip the compression
nut (B) (not supplied)
and ferrule (not supplied)
copper tubing (not supplied) as shown.
- If you are using plastic tubing (B), insert the molded end(Bulb) of the plastic tubing (B) into the compression fitt
Z_
Do not use without
the molded end(Bulb) of the plastic tubing (B).
CAUTION
3. Tighten the compression
nut (B) onto the compression
fitting. Do not over-tighten the compression
nut (B
4. Turn water on and check for any leakage.
Only connect
the water line to a drinkable
water source.
If you have to repair or disassemble
the water line, cut off 1/4" of the plastic tubing to make sure you
get a snug, leak-free connection.
Installing
the water filter.
®
1.
2.
3.
After removing the right side upper shelf, you can
install the water filter more easily.
Remove the water filter cover ( 1 )
_
CZZ}
Remove the fixed cap ( 2 ) by turning it counter-clockwise.
Keep
the cap in a safe place for later use if you don't use the filter.
Remove the water filter ( 3 ) from the box and put a replacement
indicator sticker (Indicator sticker is included
in the box) on
the filter as shown.
Place the sticker on the filter that dates
six months
in the future. For example,
if you install the water
filter in March, put the "SEP" sticker on the filter to remind you
to replace it in September.
This way, you can remember
the
time to replace the water filter. Normally, a filter life is about 6
months.
Indicato_
Settiqg up
Publicidad
