Publicidad
Idiomas disponibles
Idiomas disponibles
or combination hobs. Observe the
minimum limits set by WORKTOP
MANUFACTURER'S MINIMUM
LIMITS. This distance may be
reduced if mentioned in the hood
installation instructions.
• Never leave gas burning without a pan
above it. The grease accumulated in the
filters may drip or catch fire when the
temperature is increased.
• Avoid cooking under the hood if the
metal filters are not fitted e.g. while they
are being cleaned in the dishwasher.
• We recommend you wear gloves and
use extra caution when cleaning the
inside of the hood.
• Your hood is designed for domestic use
and only for the extraction and purification
of gases from food preparation. Use for
other purposes is at your own risk and
may be dangerous. The manufacturer is
not responsible for damage caused by
improper use of the device.
• For repairs please contact the
manufacturer's
Assistance
Department
always use genuine parts. Repairs or
modifications by unauthorized personnel
may result in damage to equipment or
malfunction, endangering safety.
• This device complies with the European
Directive 2002/96/EC on electrical and
electronic devices entitled "Electrical
and Electronic Equipment
The directive provides the framework
applicable throughout the European
Union for the return and recycling of
electrical and electronic equipment waste
[symbol] responsible for his/her safety.
Keep children away from the device and
never let them play with it
nearest
Technical
which
Waste ".
.
Instructions for use
You can activate or deactivate the
cooker hood by operating the functions
shown in the diagram.
Switch on the extractor fan a few
minutes before you start to cook in
order to ensure that a steady air flow
has been established before fumes
appear.
Allow the extractor fan to run for
several minutes after you have finished
cooking (between 3 to 5 minutes) in
order to expel all the grease from the
outlet duct. This prevents the return of
grease, smoke and smells.
will
Program the working time
1) Switch on the cooker hood and choose the
required aspiration speed.
2) Push 'Timer'.
3) Select the required programming time
from 1 to 99 minutes by using the buttons
'+' and '-'.
4) The display will alternately show the clock
and the remaining programming time.
The maximum speed 'H' can only be
selected manually and will be changed
automatically to the second speed level
after approximately 10 minutes.
Increase fan speed
Reduce fan speed
Display
Light
Timer
Publicidad
