flir E Serie Manual Del Usuario página 6

2 EN-US English
2.5 Declaration of conformity
The full text of the Declaration of conformity is available at the following internet
address: https://support.flir.com/resources/2758.
2.6 Camera parts
See section 1 Illustrations, page 1.
2.6.1 View from the front
1. Digital camera
2. Infrared lens
3. Trigger to save an image
4. Camera lamp
5. Lever to open and close the lens cap
6. Battery
2.6.2 View from the rear
1. Touch screen
2. Archive button
3. Navigation pad
4. Back button
5. On/Off button
2.7 Quick start guide
1. Charge the battery.
2. Push the battery into the camera battery compartment.
3. Push the On/Off button to power on the camera.
4. Follow the instructions on the camera screen to set up the camera according
to your preferences.
You can also set up the camera to upload images for storage online. To ena-
ble upload of images, you need to connect the camera to the internet and
pair the camera with a FLIR Ignite account. Use a computer or other device
with internet access and follow the instructions on the camera screen.
Note You can select the settings as a part of the initial setup of the camera
or later at any time via the Settings menu.
5. To measure a temperature, aim the camera toward the object. Make sure the
spotmeter is on the point of interest. The spotmeter temperature is displayed
on the screen.
#T810623; r. AA/92002/92002; mul 3