Starting The Hub; Switching Off The D750; Setting Power Options - OTC D750 Instrucciones De Funcionamiento

4.4

Starting the HUB

1. Start the HUB.
 The dialog box "Language and Country" opens.
2. Choose language and country and continue the
installation with <Next>.
3. Heed and follow the instructions on the screen.
"
HUB is started.
HUB has to communicate with D650 for control unit
diagnosis. To do so, the D650 must be supplied with
voltage via the power supply unit included in the scope
of delivery or via the OBD interface in the vehicle. A
Bluetooth connection has been configured ex-works
between the D750 and the D650.
i
To be able to use HUB for e.g. control unit diagnosis,
HUB must be licensed. Licensing can be performed
either online or with a license file. The further
licensing procedure for initial commissioning is de-
scribed in detail in the HUB online help (
Bosch Automotive Service Solutions S.r.l.
Initial commissioning | D750 | 25
5. Operation D750
5.1 Switching on the D750
!
To avoid the formation of condensed water, allow the
D750 to adjust to ambient temperature before switch-
ing on the D750!
1. Switch on the D750 by pressing the On/Off button
 After the Windows operating system has been
run up, the start mask appears.
2. Use the stylus to touch the application you would
like to work with.
CAUTION – Risk of injury from triggering
the airbag with attached D750!
If the D750 is attached to (suspended from)
the steering wheel, injuries could result from
unintentionally triggering the airbag.
¶
). Never attach the D750 to the steering
wheel.
5.2

Switching off the D750

Weitergabe sowie Vervielfältigung der Zeich- 1. Press the function key f. Rz 10
nungen sind nicht gestattet und müssen
streng vertraulich behandelt werden. Alle ( )
Rechte sind bei ads-tec GmbH nach DIN 34. Druckdatum/ print date: 17.12.2010
strictly confidential according to DIN 34. File:Airbag Lenkrad + TT13 Doku 130
 The home page and task bar are opened.
2. Select <Shutdown> from the home page.
 Windows is shut down.
"
The D750 is switched off.
i
Pressing the On/Off button
down the Windows operating system and switches
off the D750.
i
Pressing the On/Off button
switches off the D750 without first shutting down the
operating system. This mode should only be used if
shutting down the Windows operating system is not
possible.
5.3

Setting power options

The menu "Start >> Control panel >> Power options" can
be used to select and alter the power plan (e.g. the moni-
tor switch-off time or the display brightness setting).
en
.
for > 2 seconds shuts
for > 12 seconds
|
1 689 989 216 2015-07-01