Operating Elements And Connections - IMG STAGELINE PARL-12 RGBW Manual De Instrucciones

Contents
1 Operating Elements and Connections . 13
1.1 Infrared remote control . . . . . . . . . . 14
2 Safety Notes . . . . . . . . . . . . . 14
3 Applications . . . . . . . . . . . . . 14
4 Installation . . . . . . . . . . . . . . 14
5 Setting into Operation . . . . . . . . 15
6 Operation . . . . . . . . . . . . . . . 15
6.1 Remote control . . . . . . . . . . . . . 15
6.2 Operation by means of the menu . . . . . 16
7 Operation without DMX Controller . . 16
7.1 Colour spotlight and stroboscope . . . . . 16
7.2 Automatic programs . . . . . . . . . . . 17
7.3 Music control . . . . . . . . . . . . . . 17
7.4 Master / slave mode . . . . . . . . . . . 17
8 DMX Control . . . . . . . . . . . . . 18
8.1 DMX connection . . . . . . . . . . . . 18
8.2 Setting the number of DMX channels . . . . 18
8.3 Setting the start address . . . . . . . . . 18
9 Additional Functions . . . . . . . . . 19
9.1 Switching off the IR receiver . . . . . . . 19
9.2 Showing the firmware version . . . . . . . 19
9.3 Indication of temperature . . . . . . . . . 19
10 Specifications . . . . . . . . . . . . . 19
10.1 DMX functions . . . . . . . . . . . . . 20
10.1.1 1-channel mode . . . . . . . . . . . 20
10.1.2 4-channel mode . . . . . . . . . . . 20
10.1.3 5-channel mode . . . . . . . . . . . 20
10.1.4 8-channel mode . . . . . . . . . . . 20
10.2 Menu structure . . . . . . . . . . . . . 21
LED Spotlight
These instructions are intended for users with
basic knowledge in DMX control . Please read
these instructions carefully prior to operating the
unit and keep them for later reference .
All operating elements and connections
described can be found on the fold-out page 3 .
1 Operating Elements
and Connections
1 Mains jack POWER IN for connection to a
socket (230 V/ 50 Hz) via the mains cable
provided
2 Support for the mains fuse
Always replace a blown fuse by one of the
same type .
3 Mounting brackets
4 DMX signal input (3 poles, XLR) to connect
a light controller;
pin 1 = ground, 2 = DMX−, 3 = DMX+
5 Setscrews for the mounting brackets
6 Microphone for music control
7 Control buttons
Button MENU to exit a submenu
Buttons UP and DOWN to select a menu
item and to change a setting
Button ENTER to call up a menu item, to go
to the next parameter and to save a setting
8 Display
9 Mains output jack POWER OUT for connec-
tion of another light effect unit
10 DMX signal output (3 poles, XLR) for con-
nection to the DMX input of another DMX
light effect unit;
pin 1 = ground, 2 = DMX−, 3 = DMX+
13