Infrared Remote Control; Safety Notes; Applications; Installation - IMG STAGELINE PARL-12 RGBW Manual De Instrucciones

1.1 Infrared remote control (fig . 2)
Button
DMX
SLAVE
AUTO 1/ 2
SPEED
SOUND 1/ 2
UP, DOWN
STROBE
R, G, B, W

2 Safety Notes

The unit corresponds to all relevant directives of
the EU and is therefore marked with
WARNING The unit uses dangerous mains
voltage . Leave servicing to skilled
personnel and do not insert any-
thing into the air vents; inexpert
handling may result in electric
shock .
•
The unit is suitable for indoor use only . Protect
it against dripping water and splash water,
high air humidity and heat (admissible ambi-
ent temperature range: 0 – 40 °C) .
•
Do not place any vessel with liquid on the unit,
e . g . a drinking glass .
•
The heat generated inside the unit must be
dissipated by air circulation; never cover the
air vents of the housing .
•
Do not operate the unit and immediately dis-
connect the mains plug unit from the socket
1 . if the unit or the mains cable is visibly dam-
aged,
2 . if a defect might have occurred after the unit
was dropped or suffered a similar accident,
3 . if malfunctions occur .
In any case the unit must be repaired by skilled
personnel .
•
Never pull the mains cable to disconnect the
mains plug from the socket, always seize the
plug .
14
Function
switch all LEDs off and on again
DMX mode, input of the DMX start address
with the number buttons (3 digits)
switch slave mode on
automatic programs 1 and 2
set the speed of the programs 1/ 2
with the buttons UP/ DOWN
switch on music control 1 or 2, change
microphone sensitivity with UP/ DOWN
speed of the programs 1/ 2, stroboscope
frequency, brightness, microphone
sensitivity
switch stroboscope on and off
switch primary colours red, green and
blue as well as white for colour spotlight
or stroboscope on and off, change the
brightness with UP/ DOWN
•
For cleaning only use a dry, soft cloth; never
use water or chemicals .
•
No guarantee claims for the unit and no li-
ability for any resulting personal damage or
material damage will be accepted if the unit
is used for other purposes than originally in-
tended, if it is not safely installed, if it is not
correctly connected or operated, or if it is not
repaired in an expert way .
If the unit is to be put out of operation
definitively, take it to a local recycling
plant for a disposal which is not harmful
to the environment .

3 Applications

The LED spotlight PARL-12RGBW can be used
to create effect illumination, e . g . on stage, in
discotheques or in ballrooms . The spotlight
features 12 super-bright 8 W RGBW LEDs as
a light source . The LEDs can emit light in the
.
three primary colours (red, green and blue) and
in white as well as coloured light created from
additive colour mixing . Crossfading from one
colour to another and stroboscope effects are
also supported .
The spotlight is designed for control by
means of a DMX light controller (1, 4, 5 or 8
DMX channels available), but may also be oper-
ated on its own or in combination with multiple
spotlights PARL-12RGBW (master /slave mode) .
The spotlight can be conveniently controlled by
means of the infrared remote control supplied .
In addition, the integrated microphone provides
effects in sync with the music .

4 Installation

Always place the unit at a location where suffi-
cient air circulation is ensured during operation .
Never cover the air vents of the housing .
WARNING The spotlight must be installed in
under it, additionally secure the spotlight (e . g .
by means of a safety rope at the mounting
bracket; fasten the safety rope in such a way
that the maximum falling distance of the unit
will not exceed 20 cm) .
a safe and expert manner . If the
spotlight is installed at a place
where people may walk or sit