Safety Instructions - koban KTF 8 Manual De Instrucciones

Detector de tensiones
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Safety instructions.

Hold the instrument only by the insulated
cable ends (A) and (B) and do not touch the
test ends (1).
Immediately prior to use: Check the correct
working order of the voltage tester (see
Section 3). The tester must not be used if any
fault is detected. (VDE0680, Part 5; DIN
57105).
The voltage tester must only be used within a
nominal voltage scale from 12 to 690 V.
When testing, hold the tester only by the insu-
lated handles (A) and (B).
Never connect the voltage tester to voltage for
more than thirty seconds (Maximum connec-
tion period allowed = 30 seconds).
The voltage tester will only work correctly
within the temperature range of -10º C to
+50º C.
Do not dismantle the voltage tester.
It is important to keep the surface of the vol-
tage tester clean.
Attention:
After the maximum charge (i.e., after a 30-
second measurement at 690 V DC), do not
use the instrument for 5 minutes.
2. Operating instructions.
The KOBAN KTF 8 is a double pole voltage
tester according to the VDE 0680 mark, Part
five, with a visual display screen. The instru-
ment is designed to test AC and DC voltage
within a scale from 12 to 690 V. It can also be
31

Publicidad

Tabla de contenido
loading

Tabla de contenido