CEMO DT-Mobil Easy 125I Manual Del Usuario página 38

GB
5.5 Refilling
1. For the version with hinged lid, open the
hinged lid closure.
2. Version with terminal clamps:
Connect terminal clamps
age source (see tank or pump type plates).
Observe the colour coding:
• red = positive terminal (+)
• black = negative terminal (-)
Version with battery:
The battery is partly charged at the time of
dispatch. Charge the battery before using for
the first time. Set On/Off switch to Off.
3. Open ball valve
D D
4. Switch on pump
G G
5. To fill, remove delivery nozzle
holder and fully insert the delivery spout into
the container/tank to be filled.
6. Use automatic delivery nozzle
lock with locking device) and carry out the fill-
ing operation.
Tank ventilation and pressure relief are performed
automatically by integrated valve
delivery quantities, filling opening
opened.
i
Important:
Constantly monitor the filling process.
7. Close automatic delivery nozzle
the fuel to drip off.
8. Switch off pump
E E
9. Completely disconnect the pump from the
power source and roll up the cable.
10. Insert the hose and nozzle into the integrated
holder.
11. Close ball valve
D D
12. For the version with hinged cover, fold it down
and close hinged lid closure.
38
to a suitable volt-
F F
on the delivery line.
at the switch.
from the
H H
(if necessary,
H H
. For larger
B B
should also be
C C
and allow
F F
.
on the delivery line.
6. Accessories
The following accessories are available for DT-
Mobil Easy:
6.1 Hinged cover as lockable protec-
tion for the fittings
DT-Mobil Easy 430l, 460l, 600l:
DT-Mobil Easy 125l, 200l
Order no. 8833
Order no. 8963