ACD GRUPPE M2Smart SE Guía Breve página 20

4.1.5 Disposal of the DS2Smart
All components should be disposed of properly at the end of their
technical lifetime.
ATTENTION
4.2 M2Grip5
A handle is available as an accessory for the M2Smart
tools.
Figure 19: M2Grip5
The upper and lower slide mechanisms remain untouched and can therefore still be used for different
M2Modules. It is still possible to charge the M2Smart
Please note that the M2Grip5 is suitable for the M2Smart
2D shortrange Imager (SE4770).
4.2.1 Security Advices
Unintended use of the M2Grip5 should be avoided.
ATTENTION
4.2.2 Attaching M2Grip5 to the M2Smart
To attach the M2Grip5 to the M2Smart
After removing the retaining strap, the M2Grip5 can be attached to the M2Smart
To do this, guide the nose of the M2Grip5 to the upper retaining strap attachment and hook it in there. Then
slide the side sections of the M2Grip5 onto the device.
®
M2Smart SE_Set_Brief Overview_V1.02_en_es_fr
®
®
SE. It can be attached to the M2Smart
®
SE with M2Grip5 in the DS2Smart
®
SE without scanner and for the M2Smart
®
SE
®
SE, the first step is to remove the retaining strap.
®
SE without
®
.
®
SE with
®
SE.
20 / 74