EN
28
NOTES ON REFRIGERANT R290
Warning
•
The air conditioning system must be kept and transported upright. Otherwise,
irreparable compressor damage may occur. Leave the unit for at least 24
hours before putting it into operation.
•
Switch off the device and disconnect it from the power supply before cleaning.
•
Make sure that the product creates a steady stream of air. Ensure the air inlets
and outlets are not blocked.
•
To prevent leaks, operate this unit on a horizontal surface.
•
Any person performing work on a refrigerant circuit should have a current
certificate from an industry-accredited assessment body. This ensures
competence for the safe handling of refrigerants according to an industry-
recognised assessment specification.
•
If the device stops working, dispose of it properly.
•
Store the device in a well-ventilated place when not in use.
•
Store the device so that it is not damaged.
•
Repairs may only be carried out by the manufacturer or an authorised
specialist company.
•
The cables connected to the device may contain potential ignition sources.
•
Do not damage any components of the refrigerant circuit. Escaping
refrigerant may not be noticed because it is odourless.
•
Maintenance and repairs must be carried out under the supervision of
specialists in the use of flammable refrigerants.
Information for rooms with refrigerant pipes
•
Limit the piping to a minimum.
•
Be careful not to damage the piping.
•
Appliances with flammable refrigerants may only be installed in a well-
ventilated room.
•
Comply with national gas regulations.
•
All mechanical connections must be freely accessible for maintenance
purposes.
CAUTION
Risk of fire!
This device contains the flammable refrigerant R290. If the
refrigerant escapes and is exposed to an external ignition source,
there is a risk of fire.