Ghibli 1 Serie Uso Y Mantenimiento página 60

EN
8.1.e - Maximum recovery tank water
1
level alarm (Fig. 14)
If the suction unit shuts off while the machine
is in function, this indicates that the level of
the liquid in the recovery tank has reached
the maximum level sensors (1), which are lo-
cated within the tank itself.
Go to the water drainage station and drain
the recovery tank as shown in the relative
paragraph.
8.1.f - Probe height (Fig. 14)
The probes (1) are regulated for machine
use on a 2% slope.
If, in the working environment, there are up-
ward or downward sloping ramps of more
than 2%, it is necessary to adjust the height
of the probes in order to prevent damage to
the aspiration turbine.
WARNING:
For adjustment, contact the Authorised
Support Service.
Fig. 14
EN-20