Husqvarna CA230 Manual De Usuario página 246

• Use protective boots with steel toes and non-slip
soles.
• Use clothing made of a strong fabric. Always use
heavy, long pants and long sleeves. Do not use
loose clothing that can catch on twigs and branches.
Do not wear jewelry, short pants, sandals or go with
bare feet. Put your hair up safely above shoulder
level.
• Keep first aid equipment close at hand.
Safety devices on the attachment
WARNING:
instructions that follow before you use the
attachment.
This section contains the attachment's safety features,
its purpose and how checks and maintenance should
be carried out to ensure that it operates correctly. See
instructions under the heading
page 2 to find where these parts are located on your
attachment.
The life span of the attachment can be reduced
and the risk of accidents can increase if attachment
maintenance is not carried out correctly and if service
and/or repairs are not carried out professionally. If you
need further information please contact your nearest
servicing dealer.
WARNING:
with defective safety components. The
attachment's safety equipment must be
inspected and maintained as described in
this section. If your attachment fails any of
246
Read the warning
Attachment overview on
Never use an attachment
these checks, contact your service agent to
get it repaired.
WARNING:
work on the product requires special
training. This is especially true of the
product's safety equipment. If your product
fails any of the checks described below
you must contact your service agent. When
you buy any of our products we guarantee
the availability of professional repairs and
service. If the retailer who sells your product
is not a servicing dealer, ask him for the
address of your nearest service agent.
To do a check of the cutting equipment
The tines are designed and machined to withstand the
loads resulting from cultivating.
The two basic rules:
1. Only use cutting attachments with the guards we
recommend!
2. Check the cutting attachment for damage or cracks.
A damaged cutting attachment should always be
replaced.
To do a check of the cutting attachment guard
This guard is intended to prevent loose objects from
being thrown towards the operator. The guard also
protects the operator from accidental contact with the
cutting attachment.
All servicing and repair
742 - 004 - 16.11.2022