HT Instruments HT4011 Manual De Instrucciones página 38

5.7. TEMPERATURE MEASUREMENT WITH TYPE K PROBE
Do not put the temperature probe into contact with live surfaces. Voltages
higher than 30Vrms or 60VDC imply electrical shock hazard.
Fig. 9: Use of the clamp for temperature measurement with type K probe
1. Select the TypeK°C or TypeK°F position
2. Insert the K wire probe provided into input terminal V
means of the relevant adapter, respecting the polarity indicated in Fig. 9. The display
shows the value of temperature.
3. To use the HOLD function, please refer to § 4.2.
CAUTION
EN – 14
HT4011
CAPHz% and COM by