Publicidad
Idiomas disponibles
Idiomas disponibles
2
PARTS NAME OF REMOTE CONTROLLER
■
Names and functions of indicators
and controls on indoor unit
COMFORT
SLEEP
1
Infrared signal emitter
Transmits a signal to the indoor unit.
2
START/STOP button
Press the button to start operation.
(A receiving beep is heard.)
Press the button again to stop operation.
(A receiving beep is heard.)
If no receiving sound is heard from the indoor unit,
press the button twice.
3
Mode select button (MODE)
Press this button to select a mode.
Each time you press the button, a mode is selected
in a sequence that goes from A : Auto,
: Dry,
: Heat,
(A receiving beep is heard.)
4
Temperature button (
............. The set temperature is increased
up to 86°F (30°C).
............. The set temperature is dropped down
to 62°F (17°C). (A receiving beep is
heard.)
5
Fan speed button (FAN)
Press this button to select fan speed.
When you select AUTO, the fan speed is
automatically adjusted according to the room
temperature.
3-EN
SWING
FAN
FIX
QUIET
Hi POWER
: Cool,
: Fan only, and back to A.
)
You can also manually select the desired fan
speed from among five settings.
(LOW
, LOW
MED
+
(A receiving beep is heard.)
6
Auto louver button (SWING)
Press this button to swing the louver.
(A receiving beep is heard.)
Press the SWING button to stop the louver
swinging.
(A receiving beep is heard.)
7
Set louver button (FIX)
Press this button to adjust the airflow direction.
(A receiving beep is heard.) While this button is
kept depressed, the receiving tone continuously
sounds.
8
Off timer button (OFF)
Press this button to set the OFF timer.
9
On timer button (ON)
Press this button to set the ON timer.
10
Reserve button (SET)
Press this button to reserve time settings.
(A receiving beep is heard.)
11
Cancel button (CLR)
Press this button to cancel ON timer
and OFF timer.
(A receiving beep is heard.)
12
High power button (Hi POWER)
Press this button to start the high power
operation.
This function is not operated group control.
13
PRESET button
Press this button to change the operation mode
to the preferred operation mode memorized
previously. To memorize the operation mode,
press this button for at least 3 seconds during the
preferred operation mode. P is displayed and the
operation mode is memorized.
14
COMFORT SLEEP button
Press this button to start the OFF timer operation
that automatically adjusts the room temperature
and the fan speed. You can select the OFF timer
time from four durations (1, 3, 5 or 9 hours).
During group control operation, the set
temperature and the fan speed are not
automatically adjusted. Only off timer function is
activated.
- 3 -
Operations Manual
, MED
,
+
, HIGH
)
Publicidad
