Publicidad
Idiomas disponibles
Idiomas disponibles
e) Hold the hedge trimmer only by the insulated
gripping surfaces, as the cutting blade could hit
hidden power lines or its own mains cable. Con-
tact between the blade and a live power line can al-
so electrify metal device parts and lead to an elec-
tric shock.
f) Keep any mains cables away from the cutting
area. Wires may be hidden in hedges and bushes
and could be accidentally cut by the blade.
g) Do not use the hedge trimmer in bad weather,
especially if there is a risk of thunderstorms.
This reduces the risk of being struck by lightning.
Additional safety instructions
• Always wear safety gloves, safety goggles, hearing
protection, sturdy shoes and long trousers when
working with this product.
• The hedge trimmer is intended for work where the
operator stands on the ground and not on a ladder
or other unstable standing surface.
• Electrical hazard, remain at least 10 m from over-
head wires.
• Do not attempt to loosen a jammed/blocked cutter
bar until you have switched off the product and re-
moved the battery. There is a danger of injury!
• The blades must be checked regularly for wear and
have them resharpened. Blunt blades overload the
product. Any resulting damage is not covered by the
warranty.
• If you are interrupted while working with the prod-
uct, first finish the current operation and then switch
off the product.
• Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
Residual risks
The product has been built according to state-of-
the-art and the recognised technical safety rules.
However, individual residual risks can arise during
operation.
• Cutting injuries.
• Damage to eyes if the stipulated eye protection is
not worn.
• Damage to hearing if the stipulated hearing protec-
tion is not worn.
• Residual risks can be minimised if the "Safety In-
structions" and the "Intended Use" together with the
operating manual as a whole are observed.
• Use the product in the way that is recommended in
this operating manual. This is how to ensure that
your product provides optimum performance.
• Furthermore, despite all precautions having been
met, some non-obvious residual risks may still re-
main.
WARNING
This power tool generates an electromagnetic field
during operation. This field can impair active or pas-
sive medical implants under certain circumstances. In
order to prevent the risk of serious or deadly injuries,
we recommend that persons with medical implants
consult with their physician and the manufacturer of
the medical implant prior to operating the power tool.
WARNING
In case of extended working periods, the operating
personnel may suffer circulatory disturbances in their
hands (vibration white finger) due to vibrations.
Raynaud's syndrome is a vascular disease that caus-
es the small blood vessels on the fingers and toes to
cramp in spasms. The affected areas are no longer
supplied with sufficient blood and therefore appear
extremely pale. The frequent use of vibrating prod-
ucts can cause nerve damage in people whose circu-
lation is impaired (e.g. smokers, diabetics).
If you notice unusual adverse effects, stop working
immediately and seek medical advice.
ATTENTION
The product is part of the 20V gomag series and may
only be operated with batteries of this series. Batter-
ies may only be charged with battery chargers of this
series. Observe the manufacturer's instructions.
WARNING
Follow the safety instructions and the
notes regarding charging and correct use,
as specified in the operating manual for
your 20V gomag series battery and battery
charger. A detailed description of the
charging process and further information
are provided in this separate manual.
6
Technical data
Cordless grass & hedge trimmer
Engine voltage
Idle speed n
Grass cutting blade width
Hedge cutting blade cutting length
Weight (without battery, with both sets
of blade and saw chain)
Subject to technical changes!
www.scheppach.com
0
GO-SHS200
20 V
rpm
1200
90 mm
200 mm
0.96 kg
GB | 23
Publicidad
