iStorage DATASHUR PRO+C Manual Del Usuario página 21

iStorage datAshur® PRO C
+
1. Press and hold down the number 1 button and press the
KEY button once
RED, GREEN & BLUE LEDs will flash together once and then RED and
GREEN LEDs flicker together.
3. Press the KEY button once
Flickering RED and GREEN LEDs will change to a solid RED LED and then
switch to a flickering GREEN LED indicating successful Admin PIN entry
- drive unlocked as Admin.
Note: Once the datAshur PRO
and blinking for 30 seconds only, during which time the datAshur PRO
a powered USB port. It can be locked down immediately (if not connected to a USB port) by press-
ing and holding down the KEY button for 3 seconds, or by clicking the 'Safely Remove Hardware/
Eject' icon within your operating system when connected to a USB port.
When the datAshur PRO + C is unlocked and connected to a USB port, it will not accept further
instructions via the keypad
13. How to create a New User PIN in Admin mode
Creating a new User PIN in Admin mode will become necessary
if the datAshur PRO C has been unlocked for any reason with
+
the Admin PIN, as this will automatically clear (delete) the User
PIN. To create a new User PIN in Admin mode please follow the
instructions below.
C has been successfully unlocked, the GREEN LED will remain on
+
2. Enter your Admin PIN
RED and GREEN LEDs continue to flicker together.
C needs to be connected to
+
PIN Requirements:
• Must be between 8-15 digits in length
• Must not contain only repetitive numbers, e.g. (3-3-3-3-3-3-3-3)
• Must not contain only consecutive numbers, e.g. (1-2-3-4-5-6-7-8),
(7-8-9-0-1-2-3-4)
21
User Manual v1.0