iStorage DATASHUR PRO+C Manual Del Usuario página 23

iStorage datAshur® PRO + C
1. Unlock the datAshur PRO
+
GREEN LED will flicker indicating successful Admin PIN entry.
3. Enter your new 8-15 digit User PIN
BLUE LED continues to blink.
5. Re-enter your new 8-15 digit User PIN
GREEN LED continues to blink.
15. How to verify whether an Admin/
User PIN has been set up
The following table illustrates how to determine which PINs, User and/or Admin, have been set
up. With the datAshur PRO
1. Press KEY button once RED, GREEN & BLUE LEDs will flash together
once, then one of the following states occurs.
Only User PIN exists
RED LED blinks
C with your Admin PIN
C in a locked state (all LEDs off), press the KEY button once.
+
Only Admin PIN exists
BLUE LED blinks
2. Press the KEY button TWICE (double click)
Flickering GREEN LED switches to a blinking BLUE LED ready to receive
a new User PIN.
4. Press KEY button TWICE (double click)
Blinking BLUE LED switches to a blinking GREEN LED.
6. Press KEY button TWICE (double click)
Blinking GREEN LED switches to a RED LED and then quickly fades out
(off) to indicate the User PIN was successfully changed.
Both User and Admin PINs exist
RED and BLUE LEDs blink together
23
User Manual v1.0