en-us_main.book.book Page 12 Tuesday, October 17, 2023 1:22 PM
12 INSTALLATION
Preparing the Installation Location
Important Installation Information
• All electric cooktops run off a single phase, three-wire or four-wire cable, 240/208 volt, 60 hertz, AC-only
electrical supply with ground.
• Minimum distance between cooktop and overhead cabinetry is 30" (762 mm).
• Make sure the cabinets and wall coverings around the cooktop can withstand the temperatures (up to 93
℃ [200 ℉]) generated by the cooktop.
Dimensions and Clearances
Do not obstruct these areas.
a
4" X 8" (102 mm x 203 mm) opening to route armored cable if panel is present.
b
Approximate location of junction box
c
-
Dimension/Clearance
A
Width of upper plate
B
Depth of upper plate
C
Height of cooktop base
D
Width of cooktop base
E
Depth of cooktop base
F
Width of cutout
G
Depth of cutout
LCE3010SBE
LCE3610SBE
30 27/32" (783 mm)
36 11/16" (932 mm)
21 15/32" (545 mm)
21 15/16" (557 mm)
3 3/4" (95 mm)
28 13/16" (732 mm)
33 27/32" (860 mm)
19 5/8" (498 mm)
19 25/32" (502 mm)
29 3/8" (746 mm)
34 9/16" (878 mm)
20 1/4" (515 mm)
20 3/8" (517 mm)