Publicidad
Idiomas disponibles
Idiomas disponibles
en-us_main.book.book Page 16 Tuesday, October 17, 2023 1:22 PM
16 INSTALLATION
Installing the Cooktop Unit
1
Visually inspect the cooktop for damage.
Make sure all cooktop screws
below for locations).
2
Check and prepare the installation location.
• See Dimensions and Clearances.
3
Carefully lower the cooktop into the
countertop cutout, making sure not to trap
any wires.
NOTE
• Do not use caulking compound. The cooktop
must be removable, should service be required.
4
Attach the retainer brackets
of the cooktop; then snug the bolts against
the bottom of the countertop as shown.
NOTE
• The retainer brackets MUST be installed to meet
local codes or, in their absence, with the National
are tight (see
a
Electrical Code ANSI/NFPA No. 70, latest edition.
Alternative installation
LCE3010SBE
to the bottom
a
LCE3610SBE
Retainer Brackets
a
Front
b
Rear
c
Cooktop
a
Countertop
b
Bolt
c
Retainer Brackets
d
Type A Screw
e
Publicidad
