Publicidad
Idiomas disponibles
Idiomas disponibles
2. Connect hose handle to wand.
Check the end of the wand for
suction. If there is good suction
at the end of the wand, there
is no clog in the wand. If the
CLEANING EXTERIOR AND ATTACHMENTS
1. Turn off and unplug vacuum
cleaner. DO NOT drip water on
vacuum cleaner.
2. To clean exterior, or to reduce
static electricity and dust
build-up, wipe outer surface
with a clean, soft cloth that
has been dipped in a solution
of mild liquid detergent and
water, then wrung dry. Wipe
dry after cleaning.
For best cleaning results, the dust
bag should be changed often. The
check bag indicator will come
on when the bag needs to be
changed or the airflow is blocked.
NOTE: See REPLACEMENT PARTS
for part number and purchase
details (page 6).
1. Turn off and
unplug vacuum
cleaner.
2. Remove hose
from canister.
3. Pull hood
release out
and up, then
lift canister hood.
REMOVING CLOGS
DUST BAG CHANGING
Hood
Release
suction is bad, remove any dirt
or debris in the wand.
3. Check the motorized nozzle
swivel. Remove any dirt or debris.
CAUTION
Do not use attachments if they
are wet. Attachments used
in dirty areas, such as under
a refrigerator, should not be
used on other surfaces until
they are washed. They could
leave marks.
4. Pull bag out of the bag mount.
NOTE: The bag mount will flip
forward after removing bag.
This will prevent the hood
from closing until a new bag is
installed.
Bag
Mount
- 20 -
Publicidad
