Descargar Imprimir esta página

Kenmore POP-N-GO BC4030 Manual De Uso Y Cuidado página 22

Aspirador con bolsa y cepillo hair eliminator

Publicidad

Idiomas disponibles

Idiomas disponibles

MOTOR SAFETY FILTER CLEANING
WARNING
Electrical Shock Hazard
Turn off and unplug vacuum
cleaner from electrical outlet.
Do not operate the vacuum
cleaner without the motor
safety filter. Be sure the filter
is dry and properly installed to
prevent motor failure and/or
electrical shock.
MOTOR SAFETY FILTER
Check motor safety filter
occasionally and clean when
dirty.
NOTE: See REPLACEMENT PARTS
for part number and purchase
details (page 6).
1. Remove the bag as outlined in
the DUST BAG CHANGING (page
20-21) section.
WARNING
Fire and/or Electrical Shock
Hazard
Do not operate with a clogged
exhaust filter or without the
exhaust filter installed. Do not
operate without filter cover
installed.
HEPA MEDIA EXHAUST
FILTER
The exhaust filter cartridge must
be replaced when dirty. Replace
the filter when the entire surface
area is covered evenly. The filter
CANNOT be washed as it will lose
its dust trapping ability.
EXHAUST FILTER CHANGING
2. Lift the rubber retainer and
pull out motor safety filter as
shown.
Rubber
Retainer
3. Wash filter in warm soapy
water, rinse, then dry. Do not
clean in dishwasher or install
while damp.
4. Slide the filter back into place
under the ribs in the bag
cavity. Tuck filter in so that
it fits completely under the
rubber retainer.
5. Replace the bag as outlined
in the DUST BAG CHANGING
(page 20-21) section.
NOTE: See REPLACEMENT PARTS
for part number and purchase
details (page 6).
1. Push latch up to release the
exhaust filter cover from slot in
canister.
Exhaust Filter
Cover
Latch
- 22 -

Publicidad

loading