Publicidad
Idiomas disponibles
Idiomas disponibles
PERFORMANCE/SAFETY FEATURES
SUCTION
CONTROL
Increase
Suction
Decrease
Suction
CHECK BAG INDICATOR
When the vacuum cleaner is
running with normal airflow, the
light on the check bag indicator
is off. The light comes on
whenever the airflow becomes
blocked. If that occurs, check the
disposable dust bag, motor safety
filter and other possible clog
locations shown in REMOVING
CLOGS (page 19-20).
Check Bag
Indicator
To correct problem: See "Check
bag indicator activates" in
TROUBLESHOOTING (page 25).
NOTE: The indicator may activate
when using certain attachments
due to reduced airflow through
attachment.
Increase suction
for upholsteries,
carpets, and bare
floors.
Decrease suction
for draperies and
lightweight rugs.
THERMAL PROTECTOR
This vacuum cleaner has
a thermal protector which
automatically trips to protect
the vacuum cleaner from
overheating. If a clog prevents
the normal flow of air to the
motor, the thermal protector
turns the motor off automatically.
This allows the motor to cool in
order to prevent possible damage
to the vacuum cleaner.
To correct problem: Turn off and
unplug vacuum cleaner to allow
the vacuum cleaner to cool and
the thermal protector to reset.
Check for and remove clogs, if
necessary. Also check and clean
or replace any clogged filters.
Wait approximately fifty (50)
minutes and plug the vacuum
cleaner in and turn back on to
see if the motor protector has
reset.
If the canister motor does not
resume operation after the reset
procedure described above, call
1-877-531-7321 (US) / 1-844-608-
3081 (CA) for assistance.
- 18 -
Publicidad
