cecotec ENERGYSILENCE 535 2IN1 Manual De Instrucciones página 16

ENGLISH
3. ASSEMBLY
1. Loosen the base fixing screw and the lower-tube joint. Then, fix the base and the lower
tube with the base fixing screw and washer.
2. The fan can be mounted in two different ways:
- Table fan: place the lower tube on the base and fix it with the base screw. Insert the fan
body into the lower tube and tighten with the tube adjustment screw.
- Stand fan: place the lower tube on the base and fix it with the base screw. Insert the upper
tube into the lower tube and tighten with the tube adjustment screw. Then, insert the fan
body into the upper tube and tighten with the tube adjustment screw.
3. Unscrew the screw on the blades and the screw on the back grille from the motor shaft
(Figure 2).
4. Insert the back grille into the motor shaft ensuring that the three lock pins are positioned
in their holes in the back grille.
5. Screw in the back grille by turning it clockwise (Figure 3).
6. Secure the front and rear grilles together with the grille ring.
NOTE:
Make sure the fan isn't plugged in during assembly.
4. OPERATION
1. Connect the plug to a suitable socket.
2. Turn the speed knob to select the desired speed:
- 0: off, 1: low speed, 2: medium speed, 3: high speed.
3. To make the fan oscillate from side to side, press the oscillation button on the motor
housing. To stop the oscillation, pull up the oscillation button.
4. The fan head can be tilted up or down on a vertical axis. Make sure the fan is unplugged
from the power supply before making this adjustment.
5. CLEANING AND MAINTENANCE
- Disconnect the fan from the power supply and allow it to cool down before cleaning it.
- Use a soft, slightly dampened cloth to clean the surface of the device.
- Never immerse the fan in water or other liquids.
- Do not use abrasive products such as solvents, acids, or alcohol to clean the plastic
components, as these could be deformed or damaged.
- Keep the fan clean and store it in a dry place to avoid moisture.
- We recommend using neutral detergent and a soft cloth. Do not use solvents, acid
30 ENERGYSILENCE 535 2IN1
detergents, petrol, alcohol, etc. to clean the plastic parts, as they may be damaged.
- Use a vacuum cleaner to remove the dust that accumulates on the grilles. Do not remove
the safety grille.
- Do not allow water to enter the motor or touch the cord during cleaning.
6. TECHNICAL SPECIFICATIONS
Product reference: 05877
Product: EnergySilence 535 2 in 1
Voltage and frequency: 220-240 V~, 50 Hz
Power: 40 W
Description
Fan maximum flow
Fan power consumption
Service value
Power consumption on standby mode
Fan sound power level
Maximum air speed
Service value measurement standard
Contact details to obtain more information
Technical specifications may change without prior notification to improve product quality.
Made in China | Designed in Spain
ENGLISH
Symbol Value Unit
F 56.4 m /min
3
P 38.5 W
SV 1.5 (m /min)/W
3
P 0 W
SB
L 53.6 dB (A)
WA
C 2.5 m/seg
IEC 60879
Cecotec Innovaciones S.L.
C/ de la Pinadeta s/n, 46930
Quart de Poblet, Valencia (Spain)
ENERGYSILENCE 535 2IN1 31