Melchioni Family SUN Manual De Instrucciones página 20

3. IDENTIFICATION OF PARTS
The contents of the package and the parts of the appliance
The appliance can be assembled in two different configurations: floor-standing and
floor-based.
rise, allowing for more efficient distribution throughout the room.
4. COMMISSIONING AND FIRST START-UP
Some preliminary operations are necessary before first use. Proceed as follows:

Unpack the appliance and check the conditions and completeness of the
equipment, as indicated in the previous chapter.

Keep the packaging for 15 days in case it needs to be returned to the retailer; after
this period, dispose of it in accordance with the instructions on the separation of
materials indicated on it.
Floor-standing configuration
1. Appliance body
2. Telescopic pedestal
3. Pedestal coupling
4. Base
5. Remote Control
The floor-standing configuration is preferable for the
cooling function, as the elevated position of the fan
impeller enhances the air flow throughout the room, thus
optimising cooling and the removal of humid air.
Floor-based configuration:
1. Appliance body
2. Coupling shaft
3. Base
4. Remote Control
The floor-based configuration is preferable in heating
mode as it facilitates the replacement of the cold, denser
air normally found in the bottom layers, with the warm air
generated by the appliance. The latter tends to naturally
19