Melchioni Family SUN Manual De Instrucciones página 26

7. TROUBLESHOOTING
Problem
The remote control commands
have no effect
The red LED light does not light
up after inserting the plug
Should any malfunctions occur other than those listed above, including the failed or
partial heating of the rods with the switch on, a self-sufficient solution is not feasible
and the appliance must be inspected by a qualified technician.
8. TECHNICAL DATA
Power supply voltage
Maximum power
Dimensions (L x H x D)
Weight
9. PRODUCT COMPLIANCE
The producer Melchioni Spa declares that the product Floor fan with carbon resistors
Mod. SUN (cod. 158660004) is in compliance with Directive 2014/30/EU of the
European Parliament and of the Council, of 26 february 2014, on the harmonisation
of the laws of the Member States relating to electromagnetic compatibility.
The producer Melchioni Spa declares that the product Floor fan with carbon resistors
Mod. SUN (cod. 158660004) is in compliance with Directive 2014/35/EU of the
European Parliament and of the Council, of 26 february 2014, on the harmonisation
of the laws of the Member States relating to the making available on the market of
electrical equipment designed for use within certain voltage limits.
The producer Melchioni Spa declares that the product Floor fan with carbon resistors
Mod. SUN (cod. 158660004) is in compliance with Directive 2009/125/EC of the
European Parliament and of the Council, of 21 october 2009, establishing a
framework for the setting of ecodesign requirements for energy-related products.
The producer Melchioni Spa declares that the product Floor fan with carbon resistors
Mod. SUN (cod. 158660004) is in compliance with Directive 2011/65/EU of the
European Parliament and of the Council, of 8 june 2011 and subsequent Commission
Possible cause
The remote control batteries
are flat
The power cord is
disconnected
The electrical outlet is not
powered
: 220 – 240 V AC 50 Hz
: Up to 1,800 Watt
: Up to 42.4 x 113.6 x 42.4 cm
: 5.85 Kg
25
Probable solution
Replace the remote control batteries
as described in chap. 6
Connect the power cord
Check the switches on the electrical
panel