Melchioni Family SUN Manual De Instrucciones página 23

Idiomas disponibles

the appliance is assembled, taking into account that when fully extended, the pedestal

can determine an overall appliance height between 97 and 116 cm.

First start-up and operating check:

Perform the following operations in order:

Operation

Insert the electrical plug into a

compliant and powered outlet

Press the button

If each operation has the described effect, the appliance is working properly and can

be used as described below. If, however, anomalies are detected, disconnect the

appliance from the mains and contact the dealer from which the product was

purchased.

USING THE APPLIANCE

Use of the appliance entails the rotation of the blade, which moves the air in the room

where it is installed and, if necessary, also heats it. There are two heating levels,

proportional to the power level of the halogen lamp: full power mode evidently

improves the speed at which the room is heated but does not necessarily generate

greater long-term comfort; to the contrary, an overly high temperature can cause

excessive dehydration of the air and rarefaction of the oxygen in the room, thus

resulting in less comfort and higher energy consumption. The use of intermediate

heating is therefore preferable, where possible.

The indicator light

ventilation starts (cold)

The indicator light

start turning at minimum speed and the left half

of the halogen lamp turns on

The right half of the halogen lamp also turns on

The indicator light

propeller unit starts swinging right and left

The halogen lamp turns off and the propeller unit

stops swinging. After about 20 seconds, the blade

also stops rotating

Effects

lights up red

lights up blue and

lights up blue, the blades

lights up blue and the

158660004