Beurer IL 35 Instrucciones De Uso página 16

this device as well as the other devices must be monitored to
ensure they are working properly.
• The use of replacement parts other than those specified or pro-
vided by the manufacturer of this device can lead to an increase
in electromagnetic emissions or a decrease in the device's re-
sistance to electromagnetic interference; this can result in faulty
operation.
• Keep portable RF communication devices (including peripheral
equipment, such as antenna cables or external antennas) at least
30 cm away from all device parts, including all cables included
in delivery.
• Failure to comply with the above could impair the performance
of the device.
12.2 Protective eyewear
Model EP 02
P r o t e c t i o n 4-2.5 BEU 1 S - 166 S CE according to EN 171:2002
level
Protective 4-2.5 BEU 1 S - 166 S CE
eyewear The code for the lenses is comprised of the
designation following:
- Initial number for IR protection filter (1st part of
code)
- Protection level number (2nd part of code)
- Manufacturer's marking (3rd part of code)
- 1 describes the optical class of the glasses (4th
part of code)
- S describes increased strength (5th part of code)
- 166 is the normative basis (6th part of code)
- CE mark (7th part of code)
Light transmis- Max. 29.1%
sion level Min. 17.8%
Maximum av- 780 - 1400 nm: 2.9%
erage spectral 780 - 2000 nm: 32.3%
transmittance
value with
infrared
Notified body:
ECS European Certification Service GmbH
Hüttfeldstraße 50
73430 Aalen, Germany
Identification number: 1883
EU declaration of conformity: https://www.beurer.com/web/we-
landingpages/de/cedeclarationofconformity.php
13. WARRANTY
Further information on the warranty and warranty conditions can be
found in the warranty leaflet supplied.
Warranty restriction: The enclosed infrared lamp – as with all light
sources – is not subject to warranty.
16